Máy in Lê Quan - Máy in - Mực in các loại - Hàng chính hãng

 

Canon PIXMA iP1000, iP1500 Waste Ink Counter Reset

Step 1: Manual for Service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Using Software Resetter for Permanant

1. Reconnect the printer cable.
2. Download
   • General Tools software Resetter for canon Pixma iP 1500
   • General Tools software Resetter for Canon PIXMA iP1000 Printers
3. Run the Software Resetter and select (USB PORT)
4. Choose SET DESTINATION 1 And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Canon Pixma iP1200, iP1600, iP2200 Resetter

1. Download software for Canon iP1200, iP1600, 2200 Printers.DOWNLOAD Service Tool Software for Canon Pixma Printer iP1200, iP1600, iP2200
2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

Resetter canon iP 1700 and iP1300

Step 1 : Reset Hardware

1. Turn off Canon Pixma iP1700, iP1300 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal

Step 2 : Using software resetter

1. Download Software Resetter for Canon Printers iP1300 dan iP1700 Software Resetter for Canon Pixma iP1300, iP1700
2. Ekstrak/Unrar/Unzip the Software
3. run GeneralTool.exe
4. Select  USB Port where the canon ip1300 or canon ip1700 installed.
5. CLick Lock Release button
6. Select EEPROM CLEAR
7. Click Test Pattern 1 button
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.

Resetting Ink-Waste Overflow Counter Canon Pixma iP3000, iP4000, iP5000 Printers

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

Note: if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just press the Resume/Cancel button at least 10 times and the printer will be returned to step 4 automatically

Canon Pixma iP4200, iP5200, iP6000, iP8500 Reset Procedure

1. Turn off the Printers.
2. Hold Resume button click POWER.
3. Hold button RESUME, release POWER
4. Then press the button again twice RESUME.
5. Release all the buttons.
6. Indicator led in green and stay green.
7. Click the button 4 times RESUME, if you want to make another transaction. :

Look at the table below:

• 1 led- Orange – Service test print 1 times – Orange – Service test print
• 2 led – Green – EEPROM information print 2 times – Green – EEPROM information print
• 3 led – Orange – EEPROM initialization 3 times – Orange – EEPROM initialization
• 4 led – Green – Waste ink counter setting 4 time – Green – Waste ink counter setting
• 5 led – Orange – Destination setting (Press Power > Press Resume 3x) 5 times – Orange – Destination setting (Press Power> Press Resume 3x)
• 6 led – Green – Print head deep cleaning 6 times – Green – Print head deep cleaning
• 11-13 led – Orange, Green, Orange – Return to menu selection
• 14 led – Green – Left margin correction 14 times – Green – Left margin correction

1. Turn off the printer POWER button.